SWORD MAINTENANCE CLEANING KIT
The kit was just as described and easy to use. The instructions were not included in the kit, but luckily they were listed on the site so I could print them off. This was a good purchase.
SKU:: 9B1-JL600 |
Out of Stock | |
Ship for Free! |
This kit is A Must Have for all serious sword collectors. Why do you need to buy this cleanning kit? All metal parts of your sword should always be covered with a light coating of oil to prevent rust. Your sword comes with either a light plastic spray or a heavy coating of grease to protect the blade in transport across the ocean. Instructions for cleanning your sword: Step 1: Use a sheet of harai gami or erufu to remove oil and debris from the blade. Please hold the sharp edge away from you while you are working on the blade. Step 2: Tap the uchiko lightly against the blade. Continue tapping all the way to the tip of the blade. Step 3: After powdering the blade, use a clean harai gami or erufu to polish the blade in a circular motion. Repeat until the powder is dissolves. Step 4: Repeat Steps 1 to 3 for the other side of the blade. Step 5: Apply a few drops of oil along each side of the blade and use a piece of harai gami or erufu to spread the oil evenly over the blade. DO NOT TOUCH THE BLADE BEFORE RESHEATHING.
Dimension : 7.25 X 3 X 2.75 Inches
Mini Hammer : To remove the nail from the handle of the sword.
Blade Oil : Protect the sword from humidity and rusting.
Uchiko: (Powder Ball) To remove oil from the blade.
Erufu: (Cotton Cloth) T
Materials Come Packaged in Wooden Box
Mini Hammer
Blade Oil
Uchiko
Erufu Gami
The kit was just as described and easy to use. The instructions were not included in the kit, but luckily they were listed on the site so I could print them off. This was a good purchase.